Research Database
Displaying 81 - 100 of 104
Surface Fire Intensity Influences Simulated Crown Fire Behavior in Lodgepole Pine Forests with Recent Mountain Pine Beetle-Caused Tree Mortality
Year: 2012
Recent bark beetle outbreaks have had a significant impact on forests throughout western North America and have generated concerns about interactions and feedbacks between beetle attacks and fire. However, research has been hindered by a lack of experimental studies and the use of fire behavior models incapable of accounting for the heterogeneous fuel complexes. We populated the Wildland-Urban Interface Fire Dynamics Simulator with data from 11 field sites to investigate the effect of mountain pine beetle (MPB)-caused tree mortality on simulated crown fire behavior across a range of surface…
Publication Type: Journal Article
Wildfire exposure to analysis on the national forests in the Pacific Northwest, USA
Year: 2012
We analyzed wildfire exposure for key social and ecological features on the national forests in Oregon and Washington. The forests contain numerous urban interfaces, old growth forests, recreational sites, and habitat for rare and endangered species. Many of these resources are threatened by wildfire, especially in the east Cascade Mountains fire-prone forests. The study illustrates the application of wildfire simulation for risk assessment where the major threat is from large and rare naturally ignited fires, versus many previous studies that have focused on risk driven by frequent and small…
Publication Type: Journal Article
Smoke Science Plan: The Path Forward
Year: 2012
Wildland fire managers face increasingly steep challenges to meet air quality standards while planning prescribed fire and its inevitable smoke emissions. The goals of sound fire management practices, including fuel load reduction through prescribed burning, are often challenged by the need to minimize smoke impacts on communities. Wildfires, of course, also produce smoke, so managers must constantly weigh the benefits and risks of controlled burns and their generated emissions against potential wildfires and their generated emissions and must communicate those benefits and risks to the…
Publication Type: Report
Fuels and Fire Behavior Dynamics in Bark Beetle-Attacked Forests in Western North America and Implications for Fire Management
Year: 2012
Declining forest health attributed to associations between extensive bark beetle-caused tree mortality, accumulations of hazardous fuels, wildfire, and climate change have catalyzed changes in forest health and wildfire protection policies of land management agencies. These changes subsequently prompted research to investigate the extent to which bark beetle-altered fuel complexes affect fire behavior. Although not yet rigorously quantified, the results of the investigations, in addition to a growing body of operational experience and research, indicates that predictable changes in surface,…
Publication Type: Journal Article
Mastication and Prescribed Fire Influences on Tree Mortality and Predicted Fire Behavior in Ponderosa Pine
Year: 2012
The purpose of this study was to provide land managers with information on potential wildfire behavior and tree mortality associated with mastication and masticated/fire treatments in a plantation. Additionally, the effect of pulling fuels away from tree boles before applying fire treatment was studied in relation to tree mortality. Fuel characteristics and tree mortality data were gathered before and after treatments in a 25-year-old ponderosa pine (Pinus ponderosa C. Lawson) plantation. A random block design was used with three treatments plus a control at each of four blocks. Four plots…
Publication Type: Journal Article
Atmospheric Interactions with Wildland Fire Behaviour II. Plume and Vortex Dynamics
Year: 2012
This paper is the second of two reviewing scientific literature from 100 years of research addressing interactions between the atmosphere and fire behaviour. These papers consider research on the interactions between the fuels burning at any instant and the atmosphere, and the interactions between the atmosphere and those fuels that will eventually burn in a given fire. The first paper reviews the progression from the surface atmospheric properties of temperature, humidity and wind to horizontal and vertical synoptic structures and ends with vertical atmospheric profiles. This second paper…
Publication Type: Journal Article
Woodpecker habitat after fire
Year: 2011
Public land managers are asked to minimize fuel levels after fi res, including using techniques such as salvage logging. They are also responsible for maintaining suitable wildlife habitat, especially for species of concern to state and federal agencies. An area where these responsibilities could conflict is in the use of salvage logging in burned-over areas that also represent good habitat for certain wildlife such as woodpeckers. Controversy over this conflict has led to litigation. Public land management agencies need consistent design criteria to maintain suitable habitats for these birds…
Publication Type: Report
Synthesis of Knowledge of Extreme Fire Behavior: Volume I for Fire Managers
Year: 2011
The National Wildfire Coordinating Group definition of extreme fire behavior (EFB) indicates a level of fire behavior characteristics that ordinarily precludes methods of direct control action. One or more of the following is usually involved: high rate of spread, prolific crowning/spotting, presence of fire whirls, and strong convection column. Predictability is difficult because such fires often exercise some degree of influence on their environment and behave erratically, sometimes dangerously. Alternate terms include “blow up” and “fire storm.”Fire managers examining fires over the last…
Publication Type: Report
Assessing Fuel Treatment Effectiveness After the Tripod Complex Fires
Year: 2011
Over the past 50 years, wildfire frequency and area burned have increased in the dry forests of western North America. To help reduce high surface fuel loads and potential wildfire severity, a variety of fuel treatments are applied. In spite of the common use of these management practices, there have been relatively few opportunities to quantitatively measure their efficacy in wildfires. That changed with the 2006 Tripod Complex fires in the Okanogan-Wenatchee National Forest in Washington—one of the largest fire events in Washington state over the past five decades. A serendipitous…
Publication Type: Report
Ponderosa Pine Biomass Relationships Vary with Site Treatment and Site Productivity
Year: 2011
Allometric equations, which express biomass as a function of tree size, are often used to estimate the amount of fuel in a site’s canopy. Most managers assume that one allometric equation per species is sufficient, or that any error introduced by extrapolation is irrelevant. This work showed, however, that the allometric biomass relationship for ponderosa pine likely changes over space and time. The researchers concluded that for maximum accuracy, allometric equations for ponderosa pine should account for stand management history and site productivity. Thinned trees replaced their foliage…
Publication Type: Report
Introducing FuelCalc: A New Tool that Helps Turn Static Inventory Data into Actionable Information
Year: 2010
Fuel and fire managers perform fuel treatments to manage and restore ecosystems and protect resources. In order to plan effective fuel treatments that accomplish objectives, managers need to analyze fuel conditions and document the expected fire behavior and fire effects both before and after fuel treatment. To help accomplish these goals, a new software tool named FuelCalc was created. FuelCalc facilitates use of a wide range of inventory data and fuel characteristics to help calculate fuel quantities and qualities to estimate potential fire behavior, fire effects, and smoke production. By…
Publication Type: Report
Consume 3.0 -- A Software Tool for Computing Fuel Consumption
Year: 2009
Knowing when, where and how fire should be applied is critical for land managers planning to use fire prescriptively for land management goals, or allowing fires ignited naturally to burn. Myriad variables need to be taken into consideration to determine how fire will consume different fuels. Consume, version 3.0 is a user-friendly software that incorporates the Fuel Characteristic Classification System (FCCS) to predict fuel consumption, pollutant emissions, and heat release. A flexible tool, Consume 3.0 makes these calculations based on fuel loadings, fuel moisture and other environmental…
Publication Type: Report
ArcFuels: Integrating Wildfire Models and Risk Analysis into Landscape Fuels Management
Year: 2009
That risk from wildfire continues to grow across the United States is not a new problem. Managing forest fuels in the real world—such as thinning and burning prescriptively—to reduce fuel loads have been used effectively to reduce the risk of severe wildfire. These actions have been helped by a variety of software tools that assist managers in planning and evaluating fuel treatments to ensure they are cost effective in terms of impeding the growth of future large, severe wildfires. While many landscape planning tools do a fine job within the scope of their capabilities, the process of fine…
Publication Type: Report
Filling in the Blanks for Prescribed Fire in Shrublands: Developing Information to Support Improved Fire Planning
Year: 2009
By collecting information on fuel loading, fuel consumption, fuel moisture, site conditions and fire weather on fires in avariety of shrubland types, researchers are developing a fuller knowledge of shrubland fire effects. Results are beingintegrated into the software package CONSUME, a user-friendly software tool for predicting fuel consumption andemissions for fire, fuel and smoke management planning.Shrubland types studied include chamise chaparral in California, big sagebrush in Montana, pine flatwoods in Floridaand Georgia, and pitch pine scrub in the New Jersey Pinelands. Measurements…
Publication Type: Report
FOFEM: The First-Order Fire Effects Model Adapts to the 21st Century
Year: 2009
Technology is playing an increasingly pivotal role in the efficiency and effectiveness of fire management. The First Order Fire Effects Model (FOFEM) is a widely used computer application that predicts the immediate or ‘first-order’ effects of fire: fuel consumption, tree mortality, emissions, and soil heating. FOFEM’s simple operation and comprehensive features have made it a workhorse for fire and resource professionals who need to be able to predict, assess and plan for fire’s effects. Over the last decade FOFEM has undergone several upgrades as developers continue to improve function and…
Publication Type: Report
The Forest, the Fire and the Fungi: Studying the Effects of Prescribed Burning on Mycorrhizal Fungi in Crater Lake National Park
Year: 2009
A first-of-its-kind study, conducted in a forest of old-growth ponderosa pine and white fir in Oregon’s Crater Lake National Park, explored the relationships among seasonal prescribed burning, an array of soil attributes, and mycorrhizal fungal fruiting patterns. This three-fold approach not only made the study unique, but also enabled researchers to separate the effects of fire treatment from the effects of soil attributes on fungal fruiting patterns. The study’s site encompassed three different prescribed burn treatments—applied in the early spring, late spring, and fall of 2002—as well as…
Publication Type: Report